Two Channel Monitoring
The N600 is a cost effective two channel monitor for measuring force on a variety of machines. The N600 shows total, left and right force readings on a five (5) digit LED display. With ease of operation, alarm capacity and high set point alarm limits will provide greater machine and tooling protection as well as quality control. The N600 can be a standard or flush mount installation (as shown in the picture).
| Standard | Option | |
| Left, right, &total tonnage display | ✓ | |
| Deviation from tonnage setup | ✓ | |
| Displays tons or percent deviation | ✓ | |
| High &low tonnage display | ✓ | |
| Target Tonnage Indicator lights | ✓ | |
| Capacity &working tonnage alarms | ✓ | |
| Low alarms may be disabled | ✓ | |
| Automatically sets benchmark tonnage | ✓ | |
| View calibration numbers | ✓ | |
| Percent of benchmark setpoints | ✓ | |
| Percent of capacity setpoints | ✓ | |
| Automatic Zero Balance | ✓ | |
| Displays alarm setpoints | ✓ | |
| Accepts two or four sensor inputs | ✓ | |
| Analog output jacks | ✓ | |
| Standard RS-485/232 serial port | ✓ | |
| Autolearn | ✓ | |
| Part counter or Reverse load | ✓ | |
| Key reset | ✓ | |
| Flushmount Kit | ✓ | |
| Time based signatures | ✓ | |
| Overload counts | ✓ | |
| Pressroom networking | ✓ |
| No. Of Channels | Two (2) |
| Sensor Inputs | Full bridge strain gauge sensors |
| Analog Output | 1.25VDC @ press capacity |
| Resolution | Each channel provides a five (5) digit load value in 1024 resolution |
| Speed Limit | Up to 400 SPM with threshold trigger Up to 2,000 SPM with probe trigger |
| Display | Five (5) digit LED, seven (7) segment display Keypad consisting of three (3) tactile switches |
| Serial Port | RS422 (9,600 or 115,200 baud) for PressNet serial interface |
| Ethernet Port | 10 Base T for PressNet ethernet interface |
| Probe Input | Built-in voltage source (12VDC, 100mA max) provides power for the probe. It supports NPN and solid state or dry contact relay |
| Top-Stop Relay | Mechanical relay with N.O. and N.C. contacts (8A @ 250VAC or 30VDC) |
| Power Req. | 20 Watts max, 16-28VDC |
| Width | Height | Depth | |
| Standard Dimensions |
8.07 " | 5.83 " | 2.8 " |
| Flushmount Dimensions |
8.07 " | 5.83 " | 1.8 " |
| Name | Format | Link |
| User Manual |  |
| Type | Name | Description | Link |
| Standard Product | PM Kit | PM Kit includes strain gauge sensors, cables and mounting hardware |
 |
| Standard Product | PressNet | Networking software that provides detailed production and tonnage information |
|
| Standard Product | TT-Graph | Signature analysis program that generates tonnage signatures and provides a simple approach for analyzing the signatures |
|
| Service | Installation | On-site product installation |
|